Subject: Icom IC-735 Expanded RF |
1- Remove power and antenna.
2- Remove screws and open top cover.
3- Remove screws and set PA unit aside.
4- Locate diode D33 and D34 on the top of the PLL circuit board.
5- CUT the Teflon covered leads of diodes D33 and D34.
6- Reassemble the radio.
NOTE: Accessing the main board may require taking out many of the components of
the radio.
(Source: KB2LJJ)
Mods are at your own risk - Modifikationen auf eigenes Risiko |